A clean, durable, and beautifully finished solution for your van’s table setup. This 3/4" bamboo table top is built to handle life on the road—lightweight, strong, and easy on the eyes. Each top is sealed with a natural hard wax oil that brings out the rich grain of the bamboo while protecting against spills and wear. Rounded edges add comfort and a polished look.

Pair it with a Lagun Arm (sold separately) and our Seatbase Bracket for Sprinter Vans (sold separately) to complete your setup.

Key Features

• Made from 3/4" bamboo
• Sealed with natural hard wax oil for long-lasting protection
• Rounded edges for safety and aesthetics
  
• Lightweight, strong, and ideal for mobile use
• Made in the USA

Compatibility

• Universal fit: works with most vans
• Perfectly compatible with Lagun Arm (sold separately)
• Ideal pairing with Seatbase Bracket for 2019+ Sprinter vans (Sold separately) 
• Can be used in any van layout where a compact table surface is needed

This drop-down table is the perfect sidekick for your Grub Galley or fridge cabinet setup. Designed to bolt directly to the side panel, it gives you extra counter space when you need it and folds away when you don’t. Built from bamboo, it’s functional, sleek, and tough enough to handle daily vanlife use.

Key Features:

• Direct bolt-on to Grub Galley or fridge cabinet (Sold Separately) 
• Adjustable support strap for easy leveling
• Rated to support up to 15 lbs
• Easy-to-use latch keeps table secure when stowed
• Made from grain-matched bamboo for a clean, consistent look
• Pre-cut vent holes maintain fridge airflow

Compatibility:

• Universal fit for most vans
• Designed to mount directly to the Grub Galley or  Grub Fridge cabinets
• Works with a variety of van layouts and storage setups

The Fiamma F45s is our go-to awning for all Rigwell builds. This is why we designed and engineered our brackets to safely mount the F45S to vans that already have the Camp Deck Slim and Camp Deck Baja roof racks. Simply attach Rigwell Awning Brackets to the Camp Deck Slim or Baja with supplied hardware. Then the factory Fiamma F45S brackets will mount directly to the Rigwell Awning Brackets. 

Included in the box:

• 3 1/4 inch thick brackets
• Stainless Steel mounting hardware

What You'll need:

• Fiamma F45S factory brackets. These are included with the purchase of an F45S Awning. 
• Rigwell Camp Deck Slim or Baja

- 17.375”W x 22.5”D x 35.25”H

- Laser & CNC formed aluminum

- (2) aluminum drawers (1) large door compartment

- High-quality black drawer slides

- Room for two 5-gallon tanks

- Made to order in the USA. Estimated 4 week lead time.

- Two 13” Wide X 19.75” Deep drawers

- 23”W x 22.75D” x 35.25”H

- Laser & CNC formed aluminum

- Isotherm 85 Clean Touch drawer or door refrigerator (*not included)

- Works in multiple orientations

- Vent holes top and bottom

- Made to order in the USA. Estimated 4 week lead time. 

- Countertop included

- 22”W x 40”L x 36”H

- Laser-cut and CNC-formed aluminum

- Isotherm 85 Clean Touch drawer or door refrigerator  (*not included)

- (2) 13” Wide X 19.75” Deep drawers

- High-quality black drawer slides

- Room for two 5-gallon tanks

- Outdoor drop-down table (*Not included, optional)

- Made to order in the USA. Estimated 4 week lead time. 

Say goodbye to cracked glass lids and hello to durability and function. The Grub Lid is a rugged, universal-fit replacement lid designed to work seamlessly with the Dometic VA7000 sink and similar models. Built from an aluminum base and topped with a replaceable bamboo cutting board, it adds both toughness and utility to your van kitchen setup.

Key Features

• Direct replacement for fragile glass lids
• Designed to fit Dometic VA7000 sink perfectly
• Durable aluminum baseplate construction
• Replaceable bamboo cutting board surface
• Includes installation tool and hardware
• Proudly made in the USA

Compatibility

• Fits the Dometic VA7000 sink and Dometic Fold-Down Faucet
• Fits Most Vans! 
• Perfect Size for the Grub Galley

This Grub Shelf Cab is a one-off, outlet item shipping directly from the builder on a pallet. It’s brand new, never used, and free from any cosmetic defects. The cabinet features a clean, laser- and CNC-formed aluminum construction designed to handle years of use.

The front door is hinged with a single latch for secure closure. Inside, you’ll find one adjustable shelf (included), and the top surface comes with a finished countertop installed. Designed to be versatile, this unit can be mounted in multiple orientations depending on your build layout.

Quantities are limited—only one is available. Ships in as-is condition, ready to install. No refunds or returns are accepted on outlet cabinets. 

Highlights

• Outlet item – only one available

• Ships from builder on pallet in as-is condition

• Brand new, never installed, no cosmetic defects

• Hinged front door with single latch

• Internal adjustable shelf (1 included)

• Works in multiple orientations

• Built from laser- and CNC-formed aluminum

• Countertop included and installed

• Made in the USA

- *NEW Cover Material and Look

- Cooling gel memory foam

- Plush organic zippered cover

- 3 versions available (Flarespace Flares, Vanspeed Capsules, or Neither)

- CertiPUR-US® Certified Foam

- Made in USA and usually ship in 3-8 weeks

- Murphy bed: Stow, Work, Chill

- 36" under bed clearance for bike storage

- 60" x 23" folding desk/work surface. 54" Wheel well boxes

- Built-in lower cabinets with storage

- Custom mattress & sheets (sold separately)

- Durable laser-cut aluminum construction

- Bamboo desktop, side panels, sliding doors

- 20-gallon water tank compatible

-Do you have flares or capsules? No Problem! Just leave a note when you check out. 

- Made to order in the USA. Estimated 4 week lead time.

The Rigwell Power Plate is expertly designed to meet all your power supply and charging requirements with ease and reliability. Crafted from durable powder-coated aluminum, it offers a robust, corrosion-resistant finish that ensures long-lasting performance in any environment. Ideal for DIY enthusiasts, this plate simplifies your setup by providing a clean, organized solution to power or charge your 120VAC or 12VDC devices. Its sleek design not only enhances the aesthetics of your workspace but also delivers dependable electrical connectivity, making it an essential component for efficient and professional-grade power management.

Features:

• (1) 120VAC Outlet: Outlet + Protective UL-Listed conduit. This non-GFCI simple 15A outlet is ready to power (2) 120VAC appliances, but must have inline fault protection. This can also be easily removed and replaced with a GFCI or USB enabled outlet (all universally sized)
• (1) USB Charger port: This port can charge up to 5A standard USB or USB-C. We recommend adding an inline 5A fuse. 
  
• (2) Dimmer Buttons: Tactile-controlled dimmers made to control up to 3A (each) puck lights. Single tap = power on/off. Tap + hold = dim, Tap 3 times = night mode/ day mode.
  

General safe practice:

1. Do not allow your wiring to be cut into or break through the loom/insulation
2. If your wiring passes through sharp metal points, use conduits, grommets, or extra sheathing to protect them. 
3. Heat shrink over connectors when possible to avoid them coming loose.
4. Your power system and appliances must be properly grounded for safe function
5. Ensure proper contact when connecting outlets/GFCIs
6. Make sure anything attaching to a lug or bolt has optimal electrical contact
7. Torque all lugs and fasteners properly to avoid fires
8. Never pinch wires or create hard bends, these can be hotspots
9. Test each wire and appliance prior to final installation. Make sure wires are at a safe operating temp. 
10. Do not splice into these pre-made wires for secondary circuits
11. Never use WAGO connectors for 110VAC circuits
12. Never run more than 12VDC through Duplex wires
13. Never run more than 120VDC through triplex wires
14. Place properly rated fuses inline on each circuit
15. Place breakers inline for all 110VAC circuits as a redundant safety measure

Tired of your van blending in with the crowd? The RIGWRAP™ Mountain Series is a bold, DIY decal kit designed specifically to bring style and personality to your van’s rear flares or bump outs. This easy-to-apply vinyl graphic adds a custom look without the cost of a full wrap—and without needing to visit a shop. 

This kit includes two decals: one for the passenger side flare and one for the driver side flare. These are precision-cut to fit the rear flare panels on most Sprinter vans. Please note, this kit does not include lower side graphics. If you're looking to complete the look with a matching bottom wrap, click here to shop the lower RIGWRAP™ kit.

Built for DIY installation, these decals are made from high-quality vinyl and designed to withstand the elements. They add personality to your rig while also helping protect the surface from minor scuffs and scratches. Stand out at the trailhead or the campsite—without dropping thousands on a custom wrap.

The "Flares" include RIGWRAP™ for both the driver and passenger side Flarespace Flares. 

The RIGWRAP™ Mountain Series is a great way to add some style to your rig. Our team designed the mountain graphic to be bold and make your rig pop. We might be biased but, we think it looks great. 

At Rigwell, we love vans. But! We've gotten a little tired of our vans looking the same as everyone else's - a fleet of monochrome rigs with Black Rhino wheels and BFG K02's. Am-I-right? We looked into fully wrapping our van, but found that that starts at $4k+, not including custom artwork, and decided there had to be a better way to add style and protection. Now, there is. Introducing the RIGWRAP™, a purpose-built DIY decal kit to put that final touch on your rig.

The "Lowers" include RIGWRAP™ for the bottom-most panels along the driver side, passenger side and back doors. 

The RIGWRAP™ Mountain Series is a great way to add some style to your rig. Our team designed the mountain graphic to be bold and make your rig pop. We might be biased but, we think it looks great. 

At Rigwell, we love vans. But! We've gotten a little tired of our vans looking the same as everyone else's - a fleet of monochrome rigs with Black Rhino wheels and BFG K02's. Am-I-right? We looked into fully wrapping our van, but found that that starts at $4k+, not including custom artwork, and decided there had to be a better way to add style and protection. Now, there is. Introducing the RIGWRAP™, a purpose-built DIY decal kit to put that final touch on your rig. 

The "Flares" include RIGWRAP™ for both the driver and passenger side Flarespace Flares. 

The RIGWRAP™ TOPO Series is a great way to add some style to your rig. Our team designed the topo lines to have the perfect balance of bold lines and negative space. We might be biased but, it's our favorite design by far! 

At Rigwell, we love vans. But! We've gotten a little tired of our vans looking the same as everyone else's - a fleet of monochrome rigs with Black Rhino wheels and BFG K02's. Am-I-right? We looked into fully wrapping our van, but found that that starts at $4k+, not including custom artwork, and decided there had to be a better way to add style and protection. Now, there is. Introducing the RIGWRAP™, a purpose-built DIY decal kit to put that final touch on your rig.

The "Hood" includes RIGWRAP™ for the hood of the van only.

The RIGWRAP™ TOPO Series is a great way to add some style to your rig. Our team designed the topo lines to have the perfect balance of bold lines and negative space. We might be biased but, it's our favorite design by far! 

At Rigwell, we love vans. But! We've gotten a little tired of our vans looking the same as everyone else's - a fleet of monochrome rigs with Black Rhino wheels and BFG K02's. Am-I-right? We looked into fully wrapping our van, but found that that starts at $4k+, not including custom artwork, and decided there had to be a better way to add style and protection. Now, there is. Introducing the RIGWRAP™, a purpose-built DIY decal kit to put that final touch on your rig.

The "Lowers" include  RIGWRAP™ for the bottom-most panels along the driver side, passenger side and back doors. 

The RIGWRAP™ TOPO Series is a great way to add some style to your rig. Our team designed the topo lines to have the perfect balance of bold lines and negative space. We might be biased but, it's our favorite design by far!