The Nomad Bed System is currently available for 2007+ 144" wheelbase Sprinter vans with Flarespace Flares installed. We will be expanding to 170" wheelbase Sprinters as well as Transit vans.
Exciting news! Rigwell and EcoFlow have a fantastic cost-saving bundle for your van. The Nomad Bed optimizes space, storage, and functionality with three modes and built-in storage for gear, plumbing, and electrical systems. The EcoFlow 5kWh Power Kit is modular and easily installed into the bed, making it the perfect power solution. Our goal was to simplify this process and knock out two of the largest tasks in any van build. It's the dream team, the perfect combo, the answer to all your van conversion dreams.
THE ULTIMATE BUNDLE
SAVE $ 3,094
MSRP $16,044 NOW $12,950
EcoFlow Power Kit 5 kWh
The Independence Kit provides a complete off-grid power solution. With the EcoFlow AC/DC Smart Distribution Panel and Power Kit Console, you can monitor, control, and customize your power from the wall or mobile app.
Includes
1x Power Hub
1x 5kWh LFP Batteries
1x Cable Pack
1x AC / DC Smart Distribution Panel
1x Power Kit Console
2x Battery Mounting Straps
Nomad EcoFlow Bracket Kit
We engineered a three-piece bracket system that allows you to mount one 5kwh battery, the distribution panel, and the power hub all on the top shelf of the lower cabinet of the Nomad Bed. Make your EcoFlow install look super professional and tidy with this bracket kit.
Features
- Made from lightweight aluminum and steel
- Secures EcoFlow Power Kit from moving
- Clean and professional look once installed
- Made in the USA
ROOM FOR
THE ESSENTIALS
STORAGE
SPACE FOR ALL THE GEAR
"More than a bed" is not just a saying we use. The top section uses slider doors to maximize efficiency in a tight space that you might not be able to access with standard flip-up style doors. The lower section uses compression latches on an aluminum door. Each side of the lower cabinets has about 120 gallons of storage capacity. For reference, that would be equivalent to holding 72-gallon jugs of milk on each side!
WATER
20 GALLON WATER TANK
The lower section of the driver and passenger cabinet can hold a 20-gallon water tank from Northwest Conversions. The shelf in the lower cabinet has precut holes to allow a passthrough for plumbing lines. Getting the correct side water tank is essential because they will only fit one way.
Driver side cabinet - Model Number SP-L-20
Passenger side cabinet - Model Number SP-R-20
POWER
ECOFLOW 5kWh INTEGRATION
The EcoFlow Bracket Kit was designed specifically to fit in our Nomad bed system. We immediately knew when the EcoFlow Power Systems came out that we needed to make them fit in our Nomad Bed's lower cabinets.We engineered a three-piece bracket system that allows you to mount one 5kwh battery, the distribution panel, and the power hub all on the top shelf of the lower cabinet.
36" of clearance under bed panels
34" of clearance under crossbars
14" of clearance from the end of the cabinet to the van wall (handlebar room)
~36" galley/walkway between cabinets
MADE
FOR
BIKES
MTB
We ride expensive mountain bikes, and we prefer they're safe and out of the elements inside our vans. We designed the cargo boxes to stop short of the back wall, so you have plenty of room for the handlebars to protrude into that space. We also made the bed high enough off the floor to fit an XL 29er mountain bike with its front wheel off.
MOTO
The Nomad Bed has 3 feet of space between the cabinets. That means you can haul all types of motorcycles inside your van! We ride motocross bikes and always stop on the way home to get a bite to eat. It's nice to know they're safe inside the van instead of hanging off the back on a hitch carrier.
NOMAD
MATTRESS
5 INCHES LUXURY
MEMORY FOAM
You don't have to sacrifice a good night's sleep while on the road. Our Nomad Flare Mattress combines 2 inches of cooling gel memory foam with 3 inches of contouring foam base, making it ideal for side and back sleepers. The two centerpieces of the mattress are hinged together for easy folding and a seamless feel.
TECH
SPECS
60 inches north to south
78 inches east to west w/ Flarespace
36 inches under bed height
Top of cabinet box Passenger 18"H x 53"L x 15"D
Bottom of cabinet box Passenger 16"H x 53"L x 15"D
Top of cabinet box Driver 18"H x 53"L x 14"D
Bottom of cabinet box Driver 16"H x 53"L x 14"D
Desk size: 60”L x 23”D
FAQ
What vans does the Nomad Bed System work with?
Can I buy the bed without the lower boxes?
No. The bed is designed into the lower boxes and uses them as support for the bed panels.
We provide vertical and horizontal slots on the back of the lower boxes that will align with the main structural support rib in the Sprinter van. We recommend using 3-4 rivnuts mounted directly to the body of the van.
The Nomad Bed System is made right here in good old Colorado! We love supporting local craftsmen. Check out those welds when you get your bed!
The Nomade Flare Mattress is sold separately. Select this option above.
The whole bed system weighs 250 lbs.
You should not drive when the bed is in Work Mode. You can drive with the bed in Stow or Chill Mode.
Currently yes. Don’t have flares? Give us a call we can set you up.
HAVE QUESTIONS?
We're here to answer all your questions. If you can't find the answers in the FAQ section above get in touch with us in one of the three ways below
EMAIL US
SUPPORT@RIGWELL.COM
CHAT US
CLICK THE CHAT BUTTON
CALL US
888-850-0844
MADE IN
THE USA
Rigwell products are designed and manufactured in the USA. We believe American manufacturing creates jobs, reduces carbon footprint, supports fair and safe working conditions, and creates the highest-quality products.
FREE
SHIPPING
No one likes to pay for shipping! That's why all our products ship free to your door. We know how excited you are to start your build, and we hustle to get your products out the door fast.
Love van content?
So do we, join our mailing list to keep up with the latest product launches and news.